Home / Waste Handling Equipment

Waste Handling Equipment

SKIMMER

Overview :

The Nederman filtration Skimmer is a high volume coarse particle pre-separator, developed particularly for the asphalt industry but equally suitable for coarse separation of particulate matter in flue gases from metal melting and similar processes.

Specifications :

  • Air flow : up to 125,000m3/h

Key Features :

  • Typical separation of particles larger than 63 micron
  • Adjustable vanes to optimized separation
  • Incorporates discharge hopper with various outlet options
  • May be supplied in tandem with FS filter to save space and installation time
  • Suitable for higher temperature operation

Applications :

  • Asphalt manufacturing processes
  • Metal melting flue gas cleaning

NC cyclone

Basic cyclone to separate large materials from the airflow

The cyclone is a separator that uses centrifugal force to purify air

loaded with chips or dust. Its performance depends on the rotation speed, density and grading of particles. Cyclones are available with a wide range of accessories.

  • Efficiency approx. 90% for particles above 10 micron.
  • Higher efficiency for large particles.
  • Built in 2 and 3 mm (.08 in and .1 in)-thick steel sheet depending on the size.
  • Max temperature 75ºC (167ºF) with standard paint
  • The cyclone is a separator that uses centrifugal force to purify
  • air loaded with chips or dust. Its performance depends on the rotation speed, density and grading of particles. Cyclones are available with a wide range of accessories.
  • Efficiency approx. 90% for particles above 10 micron.
  • Higher efficiency for large particles.
  • Built in 2 and 3 mm (.08 in and .1 in)-thick steel sheet depending on the size.
  • Max temperature 75ºC (167ºF) with standard paint

Pre separator GA800

Pre-separate liquids and rough material to protect your high vacuum system:

GA 800 is used to minimise the wear in the pipe system. It separates

rough material before it enters the dust collector. It is particularly useful when there are large amounts of waste and if the materials that pass through the pipes cause wearing.

The pre-separator can be used for transporting metal chips, glass

splinters, concrete, gravel, sand, etc. E-PAK, VAC, or RBU are suitable suction units. GA 800 is has a drainage valve, which makes it easy to evacuate liquids from the container without letting any rough material out of the container.

Industries such as glass manufacturers, foundries, concrete

industries, building sites and metal industries have the need for a pre-separator like the GA 800.

WhatsApp chat